STAGE 6 - VAN COMPASS™ STRIKER 4X4 SPRINTER 2" LIFT KIT WITH ADJUSTABLE REAR SHOCKS AND FRONT SUMO SPRINGS (2007-CURRENT 2500 4WD SINGLE REAR WHEEL)
$4,093.00 USD
*** THESE KITS HAVE A 3-6 WEEK LEAD TIME TO SHIP ***
The STAGE 6 kit combines our STAGE 2 suspension package with Striker 4x4 Sprinter 2.0” suspension lift system. The kit improves the ride quality of the van, provides clearance for larger tires and offers additional ground clearance.
The Striker system retains the stock vehicle suspension geometry, payload rating and ride quality. All of the suspension lift system components are constructed of high quality materials here in the USA and are powder coated for durability and corrosion resistance.
With this lift kit, 315/75/16 (35”) tires can be fitted with the following conditions met:
- Removal of the front mudflaps
- Slight trimming of the rear of the front fender
- Trimming of the front bumper and front inner fender well liner.
- Minimum of a 9/16” (14mm) wheel spacer be installed on factory steel wheels with 54mm of offset or any other wheel that has comparable offset. This is for tire clearance between the inside of the tire and the strut and rear inner fender. ** Sold separately
- Note; this could be omitted with an additional 9/16” (14mm) offset and aftermarket wheels.
- 2019+ vans with adaptive cruise control are limited to 275/70/17 sized tires
- Front 2.0” strut spacer - 1/4” hot rolled steel
- Front 2.0” subframe drop spacers - 4140 heat treated chromoly
- Motor mount 2.0” lift spacer - 3/16" hot rolled steel
- Transmission 2.0" lift spacer - 3/16" hot rolled steel
- Steering shaft extension - 4140 heat treated chromoly
- Low pressure power steering hose extension
- Front brake line relocation brackets
- Rear 5 leaf mini spring pack
- Rear sway bar links - 11/16" x .120 DOM and 3/16" hot rolled steel
- Rear lower shock mounts - 1/8" hot rolled steel
- Rear bump stop drop brackets - 1/8" hot rolled steel
- Rear ride height headlight adjustment extension bracket - 1/8" hot rolled steel
- All necessary hardware
- Front Falcon 2.25" shocks and mounting brackets
- Front Sumo Springs
- Rear Falcon 2.25" piggy back SP2 3.3 fast adjust shocks
NOTE - Some 2019+ Vans with rear A/C are not compatible with our front shock mounts. Please look in the passenger wheel well for a/c lines under the plastic fender liner. Winnebago Revels do not have the a/c line run here.
Download the Front Lift Kit Instructions HERE
Front 2019+ kit HERE
Download the Rear Lift Kit Instructions HERE
Rear 2019+ kit HERE